- MINIMIZE PROPERTY DAMAGE by absorbing impact from break-in attempts and holding shattered glass together.
- EXCELLENT DAYTIME PRIVACY while reducing both heat and glare.
- STRONG ADHESIVES to last many years. For easier installation, remember to use A LOT of soap/water mixture to soak both the adhesive side and window.
- HIGH QUALITY PERFORMANCE films that are sensitive by nature. Please remember to take caution when handling the film as the slightest fold will create a permanent wrinkle.
- FREE TOOLS AND EASY INSTALLATION GUIDE to make installation DIY-friendly. Make sure window surface is completely clean and absolutely free of any blemishes.
Product Description
BDF's security films are a cost-effective means through which you can protect both your windows and your assets. Our Black Security Window Films are excellent for strengthening your glass windows and giving them a darker tint. Aside from providing additional protection and shielding, our security films help deter smash and grab attacks by either delaying a would-be thief or by thwarting efforts outright. - Available in Black 5/20/35/50, and Silver 15.
PROTECT YOUR LIFESTYLE
Protect your lifestyle from unwanted damages with BDF's Security and Daytime Privacy 4 Mil S4MS15 window film. Its 4 mil thickness allows the film to serve as a protective layer once applied to your window. The S4MS15 can absorb impact from break-in attempts and hold shattered glass together in case of breakage. Perfect for ground-level rooms that are easily approachable by unwelcomed passersby.
- 4 mil Thickness
- Protect from Unwanted Damages
- Absorbs Impact from Break-in Attempts
- Holds Shattered Glass Pieces Together
EXCELLENT PRIVACY DURING DAYTIME
Because of the dark tint, the S4MS15 provides an excellent method of promoting daytime privacy. Even though the film allows some light to pass through, the darkness makes it difficult for unwanted eyes to see what's happening inside. An important note, however, is that the effect of any daytime privacy window film will greatly depend on the brightness on each side: the side that has more light can be seen from the other side through the film, whereas the darker side is concealed by the film. This is why the privacy effect works so well during the day and almost not at all at night, since the sun usually makes the exterior of your building much, much brighter than the interior.
- 2-ply Dark Silver Window Film
- Excellent Daytime Privacy
- Curtains or Blinds are Needed for Nighttime Privacy
PROTECT FROM SHATTERED GLASS & UV RAYS
Good for homes and office buildings that are directly exposed to the public, the S4MS15 provides excellent safety and protection. Not only does the security film protect the window from shattered glass in case of breakage, it also protects your interior from harmful UV rays from the sun. It rejects about 99% of the UV rays, helping to reduce fading on your precious furniture or other UV-sensitive belongings. The dark silver tint also helps reduce heat and glare.
- Cuts 76% of Total Solar Energy
- 99% UV Rejection Rate
- Protects Your Family from UV
- Protects Furniture and Wall Pictures
OUR BLACK & SILVER TINT SECURITY FILM COLLECTIONS & SPECIFICATIONS: all data values are for comparison purposes only
To Start: Cleaning the Window & Preparation
Install the window film on a cool day and not in direct sunlight. An adjacent work surface next to the window is recommended. It will be much easier to install film on smaller windows, so we suggest starting with the smallest windows first.
It is best to clean the window with a window scraper before any installation. A window scraper is a glass safe razor blade, usually with a handle that can scrape the glass of any contaminants without scratching the glass. Using the window scraper and installation solution all over the window will clean it of any caked-on dirt that wiping will not remove. You can use the installation solution to also clean the window, as well as any non-ammonia-based cleaners.
It is recommended to also clean the surrounding area of the glass, like the frame and seals before installation. Using a no lint or low lint cloth will ensure the glass will be free of any dust.
The installation solution can be made by adding 8-10 drops of liquid soap for every 16 oz. of water.
Separating the Backing Liner from the Film
Window films have 2 parts: the actual film and the backing liner. Find a corner of the film to separate the liner and film. The liner will always be clear and thinner than the film.
The best way to separate the film and liner is to use two pieces of tape. Attach one piece of tape to a corner of the film, half of the tape on the film and the other half extending out from the corner. Then use another piece of tape on the other side of the same corner. Both tapes should be placed slightly offset. Hold onto the two tapes and press them together to grab the film's corner tip firmly. Then slowly separate the two pieces of tape; the liner and film should separate.
As you gently pull the liner away, spray the exposed adhesive side of the film with the installation solution. This will make the film heavier and easier to manage, and it will also prevent the film from sticking to itself or to anything else.
When the liner is all pulled away, the film's exposed adhesive side should be fully wet.
Handling the Sticky Window Film
Spray, spray, and spray more! You need to spray a lot to make the film fully wet and to be almost flooded on the film and the window glass surface. Please remember that fully wet window and film is one of the key factors for your successful installation.
To handle the film easier when separating the film and the liner, spraying soapy solution liberally on the exposed adhesive side as you pull off the liner will prevent the film from being sticky. This will prevent the adhesive side from sticking to itself, eliminating potential wrinkles and bubbles during or after installation.
Once the film piece is on the window, the squeegee should be used with firm pressure to push out the soapy water solution from inside the film, so that the moisture does not continue to interfere with the adhesive after the film has been installed.
Also, the soapy solution should be sprayed on top of the film surface prior to the squeegee use. This will help your squeegee glide across the film.
Can I remove this film later?
Your installed window film can be removed even after years. You need to soften the cured or hardened adhesive of the film to remove the film. A fabric steamer or a heat gun can heat up the film and loosen the adhesive. Using a hair dryer can work, but it will take longer.
If there is remaining adhesive residue, it can be easily removed with soapy water and a window scraper. Note that for adhesive films, the removed piece is not reusable.
Removing a static cling film is very easy and simple. The static cling film doesn't have the adhesive and can be removed by hand, and you can store the removed film for reuse.







